Most bulk-order disputes do not begin in production. They begin at the sample stage, when two people look at the same strand and leave with different ideas about what it represented. The buyer reads it as the minimum standard; the supplier reads it as an example.

A sample fixes a reference. It does not prove consistency across fifty strands, or that the next batch will look like this one. So the work is to make it specific, then write down what it commits to.

Specify in fields, not in grades

Buyers often open with a grade: “send me a AAA sample.” It is a reasonable shorthand and a poor specification, because the grade labels used in the pearl trade — AAA, AAAA and the rest — are a commercial quality reference, not a universal international grading standard. Two suppliers can both say AAA and mean different things, and neither is lying.

What travels between two companies without losing meaning is a measured value. These are the fields worth fixing before a sample is even requested:

FieldWhat to stateHow it is checked
Pearl typeCultured freshwater pearlStated on quotation and invoice, not only in email
SizeA band, e.g. 7.5–8.0 mm, not a single numberCaliper on every pearl; record min, max and average
ShapeRound, near-round, button, oval or baroqueSight down the strand; the shape should read as one line
LusterHow sharply a light source reflects off the surfaceDaylight, against a reference photo agreed in advance
SurfaceWhich blemishes are acceptable, and how many per strand10× loupe; count spots, pits and chalky patches
ColourHue, overtone and acceptable spread — and whether goods are Dyed or Naturally ColoredCompare every pearl in the strand; a colour band is a range, not one value
MatchingHow closely adjacent pearls must agree in size and toneLay the strand flat, step back, look for the jump
Drill and stringingHole size, knotted or unknotted, thread type, claspInspect hole rims; pull gently to test the knot
Length and countCentimetres or inches, plus the pearl countMeasure with the strand relaxed, then count

Nine fields is more paperwork than most first enquiries carry, and it is the difference between a sample that settles a question and one that postpones it.

Examining the sample when it arrives

Daylight, not showroom light

Showroom lighting is designed to make pearls look better than they do; fluorescent tubes and warm LED both push colour. A strand that reads soft white indoors can turn creamy or pink in indirect daylight. Judge colour and luster near a north-facing window, and compare against the reference photo you agreed rather than against memory.

Measure every pearl, not the strand

Calipers on the whole strand take ten minutes and catch the most common substitution in the trade: a strand sold as 7.5–8.0 mm that is mostly 7.4 mm, with two pearls at 8.1 mm to make the average work. Record the smallest and the largest. A spread wider than the band you agreed is a conversation to have now, not after production.

Count and check length relaxed

Count the pearls, then measure with the strand hanging under its own weight rather than stretched across a table. Both numbers belong next to the size band, because a strand can be the right length with the wrong count.

Inspect the drill hole rims

This is where a strand fails first. Chipped or flaked rims abrade the thread and the neighbouring pearl, so the necklace breaks in wear rather than in transit. Loupe the holes on ten pearls from both ends.

Photograph it the way you will photograph the bulk

Same camera, same window, same distance, grey card in frame, caliper visible. That photo becomes the standard you can hold a later shipment against, and it costs nothing to take once.

What a sample will not tell you

  • Colour consistency across a large lot. One strand cannot show the variation between production batches, which matters most on dyed goods. Ask how many strands come from one dye lot, and what happens if your order spans two.
  • Supply continuity. The next run is made later, from different shell. Agree a replacement tolerance in writing, in the same fields as the original order.
  • Hardware. Clasps and thread are usually substituted for what is in stock. If the clasp is part of your design, specify it as a line item with a photo.
  • Wear over time. Nacre thickness drives durability and cannot be read off a photograph. Lower-grade goods look fine new and dull within a season.

Seal a retention sample

Before production, ask for two identical sets. Sign and date both, photograph both in one frame, keep one and let the supplier keep the other, and write “retention sample, dated …” into the purchase order. When the bulk arrives the comparison is against a physical object both sides agreed to, not a matter of memory. It is the lowest-cost risk control in the process, and the one most often skipped.

Three failures worth designing against

  • Grade drift. The sample is drawn from the top of the grade and the bulk from the middle. It happens because AAA was never defined; measured fields make it visible on arrival.
  • Size creep. A 7.5–8.0 mm band quietly becomes 7.0–7.8 mm — small enough to miss by eye, large enough to change the price per strand and the finished look of a necklace.
  • Colour drift on dyed goods. Two dye lots in one shipment, and half your catalogue photographs no longer match the product. Order from one lot, or accept the variation in writing and plan the photography around it.

Terms to settle at the same time

Samples from us are chargeable; we do not offer free samples, and sample cost and freight are quoted separately from production. Standard MOQ is 10 strands, custom production starts at 50 sets, payment is normally T/T 30% deposit with 70% balance, and typical lead time is 20–30 days from confirmation. Orders are quoted FOB China (Incoterms 2020): unless agreed otherwise in writing, the buyer covers shipping, customs duties and import taxes.

The specification sample page shows those fields on a real quotation; the quality and grading page covers luster, surface, shape, colour and matching; the quality control page shows where checking happens before packing; and how to order sets out the sequence end to end.

Before you approve

  • Every field in the table written down, not remembered.
  • Size measured across the whole strand, min and max recorded.
  • Colour judged in daylight against the agreed reference photo.
  • Treatment stated on the quotation: Dyed or Naturally Colored.
  • Drill hole rims checked on ten pearls from both ends.
  • Two retention samples signed, dated and photographed.

If a sample has arrived and something reads wrong but you cannot name it, send us the daylight photo with the caliper in frame. Naming the problem is easier with a second pair of eyes, and much cheaper now than after fifty strands are strung.